The SenseCAP S2100 Data Logger connects the sensor, collects the Data, and uploads it to the LoRaWAN gateway. It can support up to 100+ industrial sensors and 100+ grove sensors including various sensor types such as Analog/RS485/GPIO. It has a built-in battery and an IP66 enclosure, optimized for outdoor use cases that need reliable data collected over years. With Bluetooth 5.0 for easy configuration and firmware upgrade, It is also compatible with a wide range of frequencies(863MHz ~928MHz), different gateways, and LoRaWAN network servers.
 
Why is SenseCAP S210x outstanding in LoRaWAN Sensors? 
 
S210x offers an easy-to-use experience design. 
 
 
Traditional LoRaWAN Sensors
SenseCAP S210x
Sensors
Parameter Setting 
need a cable to connect the device to computer; unfriendly to users without technical background 
no need for a cable; a few clicks on your phone will finish all the configuration work via Bluetooth
Device Status Observation
disassemble the device and observe status of the lights on PCBA
external buttons and LED on the device, easy to press and observe
Power
use customerized battery; can not be accessible on the market 
some need Wiring Method to power the device
the standard D-size Li-SOCL2 battery  available on Amazon and other platforms
no need for wires, battery-powered
Frequency offer
if you get the wrong frequency, then you will have to change it and bear freight or custom cost
each device supports frequency from 863MHz ~928MHz, you can change the frequency any time via your phone
Deployment Test
it’s hard to find whether the sensor works during field deployment stage
can know the real time status of your device via your phone
 
With it, you can be benefited from: 
 
Scan-and-Play Simplicity, Easy Configuration via Bluettoth in Just 1 min 
 
Bluetooth 5.0 has reduced many configuration works, no need for connecting it with your computers or do some complicated wiring work. All you need to do is to scan the QR code on the device, and the DevEUI、AppEUI and AppKey will automatically show up on your phone. After a few clicks to set the frequency (because each device supports 7 frequencies, more info is shown below),  the whole configuration process is done! 
 
For individuals who are new to LoRaWAN, they can quickly get started with this small but powerful IoT wireless temperature and humidity sensor. So, if you’re seeking some wireless temperature and humidity sensors for your smart garden or smart irrigation home projects or you want a wireless air temperature and humidity sensor to detect the ambient air quality for your home or office. This wireless long-range air temperature and humidity sensor is the one you don’t want to miss. 
 
For business, in order to achieve the biggest efficiency, it is important to cut the time and cost that is going to be spent on large scale device deployment and later device maintenance, this wireless Long Range temperature, and humidity sensor can give you a hand on this. 
In Q3,  we will release another two advanced functions for you to set time intervals (how often you want to receive the data) and set threshold values (not all the data are valuable and you can focus on the range you need to take action for). 
 
Minimal maintenance cost: power-conscious battery, rugged enclosure and remote data monitoring   
 
SenseCAP S2100 data logger incorporates a built-in Long Range Module(Wio-E5) for long-range transmission and a standard Li-SOCl2 high-capacity battery. It is specifically designed and optimized for use cases that need to power end devices for years. To minimize the power consumption, the device wakes up, transmits the collected relative data to the gateway, and then goes back to sleep. 
 
Under the best of circumstances, the battery is expected to last for more than 10 years, depending on the environmental factors and data transmission intervals. Please kindly note that the default interval is once per hour. The sensor can quickly replace a new battery by unscrewing just three screws. The battery is a standard Li-SOCl2 battery (type: ER34615) that can purchase from Amazon and other platforms.
 
Different data display choices — Open API for different data management consoles 
 
It allows you to check the real-time data on the phone, which gives you the biggest convenience. You can remotely check the data highs & lows.
 
We provide an easy integration method if you’re using other PaaS to manage your data, such as Microsoft Azure or AWS or your own cloud/Edge servers. 
 
Strong compatibility: works perfectly with different gateways and network servers
 
SenseCAP Architecture: SenseCAP ecosystem offers you a no-code and the most time-saving experience
 
If you’re using our SenseCAP LoRaWAN Outdoor Gateway, then you are successfully building a SenseCAP ecosystem, which means that you can onboard your device just by a simple OTA configuration on your phone. This can be a no-code process and then you can get access to a convenient web-based console.